ADSS Overhead Cable Accessories Strain Suspension Clamp Bracket Pole Hardware

Overview

Basic Info.

Model NO.	Fiber Optic Cable Fittings/Hardware
Application	Round Hanging Cable Hardware
Cable Diameter 2	Different Cable Diameter
Kind	Pole Clamp
Material	Aluminum Alloy/Galvanized Steel.etc
Product	Strain/Tension/Suspension Clamp
Product Name	Hanging Cable Accessories/Hardware
Transport Package	Export Carton
Specification	Can be customized
Trademark	SL
Origin	China
HS Code	8538900000
Production Capacity	1000000/Year

Packaging & Delivery

Package Size 45.00cm * 35.00cm * 25.00cm Package Gross Weight 10.000kg

Product Description

ADSS Overhead Cable Accessories Strain Suspension Clamp Bracket Pole Hardware

Product Introduction

Application :Tension Clamps are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can't cause undue stress to the ADSS cables, so as to ensure the normal lifetime of cables system.

Structure and Raw Material:
Shackle--Hot dip galvanized steel. Shackle is connected with Reinforcing Pole units.
Twisted Chain Link--Hot dip galvanized steel. Twisted Chain Link is intended for connecting U- Shackle and Clevis Thimble.
Thimble---Hot dip galvanized cast steel. Thimble is plugged in shackle of Tension Clamp for protection and connection.
Armor Rods----- Aluminum clad steel wire. Armor Rods increase friction with a layer of particle emery inside to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.
Preformed Dead End -- Preformed Dead End are made of hot dip galvanized steel wire or aluminum clad steel wire, it is assembled into one subset with a layer of firm emery inside in workshop, in order to increase gripping strength of Tension Clamps while decreasing side pressure.

Application: The Preformed Suspension Clamp is the connecting hardware of ADSS cable hang in transmission line pole (tower). It can reduce static stress at the support point and increase ant-vibration ability of ADSS cables, and cushioned against the dynamic stress of aeolian vibration. as well as ensure that the cable bending will not exceed the permissible values, make the cable does not produce bending stress, so that the fiber optic don't produce extra loss in the cables.

Structure and Raw Material:
Housing Clamp--- It is made of corrosion resistance cast aluminum alloy, which is stable, better anticorrosive in aero and mechanical performance.
Rubber Insert--- It consists of high-class rubber and center reinforcing assembly, rubber insert is with ozone resistance, chemical resistances, weather resistance performance, with high and low temperature performance, high strength and elasticity, small compression deformation.
Bolt, Flat Washer, Spring Washer, Nut, Split Lock, Shackle--- Standard Parts of Electric Power.
Inner Preformed Rods---According to the mechanical performance and chemical composition to custom-made the aluminum alloy wire, with high tensile strength, hardness strength and excellent elasticity and strong rust resistance , it can be used for a long time in the bad weather condition.
Outer Preformed Rods--- The same as the Inner Preformed Rods.

ADSS Plastic Anchor Clamp :This Conical wedge clamp composed of an opened thermoplastic body with very high mechanical and climatic resistance, an inner sheath consisting one or two insulating plastic wedges ensuring the clamping of the neutral messenger without damaging cable insulation.

Two stainless bail ends are compressed on it to lock intoclamp. Simple assembling because the wedges open by pulling them back. The flexible steel loop can be fixed into a closed eye bracket.ADSS J Type Hook Suspension Clamp:J type Suspension clamps designed to suspend ADSS round optical fiber cable during construction of transmission line. The clamp consists of plastic insert, which clamp the optical cable without damaging. A wide range of gripping capacities and mechanical resistance archived by wide product range, with different sizes of neoprene inserts.Application:The suspension clamp is used for the direct suspension of round fiber optic ADSS cables with Ø 8.0 to 20.0 mm on short spans (max 100m) at intermediate poles on straight routes.

Product Parameters

Plastic anchor clamp :

Product Model	Cable Diameter	Bread Load	Weight	Material
PA2000 Anchor Clamp	8-14mm	8KN	0.55KG	UV resistant nylon PA66+Stainless steel

J-HOOK Suspension Clamp:

Product Model	Cable Diameter	Bread Load	Weight	Material
J Hook Clamp	10-20mm	4-10KN	0.58KG	Carbon steel with hot dipped zinc

Metal Suspension clamp:

Product Model	Cable Diameter	Bread Load	Weight	Material
Suspension clamp	For ADSS cable	40KN	1.5KG	Hot-dip galvanized steel

If you need more product information, please visit our company website or send me an inquiry. Thank you~ :)More Related Products Packaging & Shipping

Shipping Method:we can ship out by sea,by air,by International Express.Company Profile Hunan Shuanglin Communication Technology CoLtd. designs manufactures, and markets all kinds optical fiber cables for outdoor and indoor communication transmission solutions.The company offers ADSS,OPGW,Figure-8,Air-blowing,FTTH drop, Duct cables and all installation accessoriesThe company has factory and management system, has>15years in fiber cables design and production experiences, can make high quality products according to customer drawing and also can design for them also can provide online technology services. The company has businesses across the Americas, Europe, the Middle East, Africa, and Asia-Pacific.
FAQ

Q1.About the price?

Re.We usually quote within 2 hours after we confirm the technical data of your products.
Q2.What's the payment method?
Re.We accept T/T,Western Union,MoneyGram,PayPal etc.
Q3.What are your terms of payment?
Re.30% in advance,and 70% before shipment
Q4.How to ship the items to me?
Re.By Courier(DHL,TNT,FEDEX,UPS,EMS),Airfreight,Ocean Ship are available.
Q5.How long is your delivery time?
Re.The general delivery time is 3-5 days after order confirmed,it depends on the order quantity.
Q6.Can you send me a free sample?
Re.Yes,We are willing to send free sample,if you would like to pay the shipping costs.
Q7.Do you accept OEM or ODM?
Re.Yes,we're factory. any your customized requirements we can do our best to help you realize.